16 I/O PLC Unit to Replace HMI PLC FX1N 32MR Units – 24vdc
£149.95
These units replace the Mitsuibishi FX1N units as seen on many CNC Machines and Barfeeder systems over the past couple decades
![](https://cncmachinetoolrepair.co.uk/wp-content/uploads/2024/06/est_del-jpg.webp)
These units replace the Mitsuibishi FX1N units as seen on many CNC Machines and Barfeeder systems over the past couple decades. PLC Ladder programs can be created and edited using the GX-Works 2 or GX Developer software.
Fanco FX1N Details: | ||
Operation control method | Stored program repeatedly scanning mode | |
Input and output control mode | Batch mode (when executing END instruction), input and output refresh command, pulse capture function | |
Programming language | Ladder diagram, SFC stepping instructions | |
Ladder programming software | GX Developer, GX Works2 | |
Program memory | 8K step EEPROM | |
Type of instruction |
Direct instruction | 27 |
Step ladder instruction | 2 | |
Basic application instruction | 70 | |
Instructions speed | Basic instructions | 0.1μS-0.55μS instruction |
Application instructions |
0.8μS-10μS instruction | |
input Output | Input relay X | X0-X127,128 points |
Output relay Y | Y0-Y127,128 poinst | |
Auxiliary relay M | General use | M0-M1523,1524 points |
Special use | M8000-M1535,1152 points( after M500 Power down save) | |
State S | S10-S999,1000 points | |
Timer T |
100MS | T0-199,200 points |
10MS | T200-T245,46 points | |
1MS | T246-T249,4 points | |
100MS accumulation | T250-T255,6 points | |
Counter C | Counter 16 bits | C0-C199,200point(after C100 Power down save) |
Counter 32 bits | C200-C255,56 points | |
Data register | General use | D0-D500(after D200 Power down save),500point |
Special use | D8000-D8255,255 points | |
Indexing | V7-V0,Z7-Z0,16 points | |
Nested pointer | P0-P127,128 points | |
constant |
K 16 bit | -32768-32767 |
K 32 bit | -2 147 483 648-2 147 483 647 | |
H 16 bit | 0-FFFF | |
H 32 bit |
0-FFFFFFFF |
Reviews
There are no reviews yet.